If three or more fingers fit, the gullet is too narrow. With the saddle on without any pad, you should be able to assess the bars.
The ideal angle for the bar, when viewed from the front of the horse, should match the slope of the area just behind the horse’s shoulder.
How to measure a western saddle to fit your horse. My saddle is pinching, i need a wider tree. If your legs are longer, you may need a larger seat than your measurement so that your knees don’t hit the front fenders. It’s best that you take a step back and take a close look at your horse while he is saddled to determine fit.
The seat size on a western saddle should be: You have some angles that are steep and narrow, while others are flat. But, to get the most out of your saddle, you need to find one that fits both you and your horse.
If you can vertically fit your whole hand between the bottom of the gullet and the wither, the tree is probably too narrow. You have to measure the withers. Locate the tape marked b, on the rock card you will see a notch cut out of the profile card place that notch on the tape at b.
The bars of the tree should lay completely flat on the back without any rocking, says oliver. There should be two to three fingers space between the top of the wither and the gullet of the saddle. If your horse has a narrow “a” shape, the saddle may be too wide.
To measure a saddle gullet, do the following. Find the card that fits the best. Consider these seat sizes carefully when buying a new saddle.
Very important is your heels need to be in line with your shoulder! Fit the saddle for the horse, fit the saddle for the rider a saddle that doesn’t fit you properly will be uncomfortable to ride in and will throw you out of position. Mark the middle of the wire at the 8 inch point with a marker.
Stand your horse straight and square without a saddle with his left side facing you on level ground against a solid background of a contrasting color as shown in the picture below. Your saddle is too narrow if the front of the saddle sits high. The front of your saddle should be positioned behind your horse’s shoulder blade, allowing him freedom of movement.
The bar angle and rock are also very important to fit. Ideally your thighs shouldn’t touch the front of the. The numbers at the front of the card s represent the distance from b to a (just behind the scapula) in this case about 8 1/2″ for this horse.
To make sure you have the correct size saddle for your horse, place the saddle or saddle tree on your horse’s back. The gap should fit no more than two fingers to two and a half fingers. Even if you have the luxury of an expert to help you fit your saddle, it’s important to learn how to measure a horse for a saddle.
To measure for both western and english saddles, evaluate your horse’s conformation. Coated wires such as romex or soldering wire work well. Before you try to fit a western saddle, place a saddle pad on the horse's back.
If the bar angle is too wide for the horse, it will pinch at the contact point. To help get in that position, over stretch your upper leg way back then relax. Sit in a saddle, on a horse, with your legs out of the stirrups, with your upper legs and knees as straight down as possible.
Place the saddle tree on your horse’s back. If fewer than two fingers fit, the gullet is too wide. Rigging is the method of safely securing your saddle to your horse for a snug fit.
The bar angle is comparable to the pitch on a barn’s roof. Take a flexible wire that can be bent easily. Build the saddle fitting measuring tool.
Place your hand into the space between the saddle and your horse’s wither, using your fingers to measure the vertical space. Ensure the saddle does not block the horse’s front shoulder or extend beyond the last rib in their ribcage. To measure the cap, just measure from one side to the other.
To measure the post and the cap, use a straight edge to measure from the bottom of the horn to where the cap begins. So i thought i’d make it a little easier for you, and teach you how to measure for a saddle. A saddle is an important part of your riding experience.
To narrow down your choices, you will still need some idea of the type, size and construction of the saddle you need. Remember, a good way to figure your western saddle seat size is to take your english saddle seat size and subtract 2″. There are not any standards or definitions of specific tree sizes, but each saddle builder provides a description to give an idea of the size of horse the tree should fit.
This can be a really challenging process! Assess your age and demands to pick a seat that fits perfectly to your riding demands. Place it over the wither 2″ behind the horse’s shoulder blade.
Place the saddle on the horse’s bare back without a pad. Gullet width or sometimes referred to as bar spread is the measurement 2 inches below the narrowest part. How do i measure a saddle gullet?
You measure your western saddle’s gullet by stretching a tape measure from concho to concho across the front of the saddle directly below the pommel. Gullet width is only one aspect of tree fit. How do you size and measure a saddle for proper fit?
When it comes to measuring a western saddle seat size, simply measure from the base of the horn to the edge of the cantle. This area is known as the “saddle pocket.”. If you can place two or three fingers in between the horse’s gullet and your horse’s withers, that means it’s a good fit.
Simply put, you want the bottom of the saddle to match the shape of your horse's back as closely as possible. The main feature of the saddle which dictates whether it will fit your horse or not is the width of the gullet. How do you buy a saddle that fits your horse?
To get the proper fit, measure the distance from the saddle “tree” to the horse’s shoulder to offer adequate protection to the horse’s back. He wants the saddle skirt to fit close to the horse's back. Step straight back from the middle of the horse’s left side just far enough that.
To measure a western saddle you should measure the distance between the highest point of the cantle to the top of the gullet. Cut a sixteen inch piece of stiff wire that can be easily molded to fit your horse’s shape and retain that shape when removed from the horse. Stand behind the horse and look through the gullet, or the hollow space over the horse’s spine, and make sure you can see all the way to the horse’s.
Your saddle fits just right if it sits level on your horse’s back and the bars of the tree do not pinch.